Outdoor Storage

Fall doesn’t have to mean the end of boating season in South Florida. But if your boat will spend more time parked than cruising, a little preparation now can help keep it ready for your next adventure.Before storing your boat, clean it thoroughly, let it dry completely, follow the manufacturer’s engine and battery storage instructions, inspect the trailer, and secure a properly fitted, ventilated cover. Your preparation should reflect your boat’s equipment, storage location, and how long it will sit unused.Use this fall boat storage checklist before you park.
1. Clean Your Boat Inside and Out
Start with a thorough wash to remove salt residue, dirt, and buildup. Use marine cleaning products appropriate for your boat’s surfaces, and rinse the boat, outboard exterior, and trailer with fresh water. Regular washing and proper engine flushing help address the corrosive effects of the marine environment.Work through the areas that are easy to overlook:
Hull, deck, and swim platform
Seats and upholstery
Storage compartments
Livewells and fish boxes
Trailer frame and wheels
Remove food, trash, bait, and personal belongings. Check the care instructions before applying cleaners or protectants to vinyl, canvas, clear plastic, or other specialty materials.If your engine requires flushing, follow its owner’s manual. The correct equipment and whether the engine should run during flushing depend on the model and method.
2. Let Everything Dry Before Covering
Washing is only part of the job. Allow the boat to dry thoroughly before closing compartments or installing the cover. Yamaha specifically recommends drying the boat completely before closing it up for storage.Give extra attention to areas where water can collect, including beneath cushions and inside storage lockers. Dry removable gear separately rather than leaving damp towels, life jackets, or ropes bundled inside.Drain livewells, water systems, and the bilge as directed by the boat and equipment manufacturers. For storage on a trailer, confirm the recommended drain-plug arrangement and positioning so water can escape. Add replacing any removed drain plugs to your pre-launch checklist.
3. Follow the Manufacturer’s Maintenance Recommendations
A general checklist is a starting point. Your ...
Storage Team
October 9th, 2026